|
Post by bender on Aug 22, 2004 20:33:32 GMT 10
hey this chip looks realy good for its price ans size. im getting one from oatley so it tell u about it when it arrives. i think it will replace the job of the 386 in my robot. and il use the old computer for something else.
|
|
|
Post by bender on Aug 14, 2004 18:03:17 GMT 10
|
|
|
Post by bender on Aug 13, 2004 20:18:14 GMT 10
|
|
|
Post by bender on Aug 12, 2004 17:59:58 GMT 10
|
|
|
Post by bender on Aug 10, 2004 14:46:26 GMT 10
all your information is heaps good. that circuit would be nice bones.
|
|
|
Post by bender on Aug 9, 2004 18:04:29 GMT 10
|
|
|
Post by bender on Aug 8, 2004 21:58:38 GMT 10
hi i have got a old computer thats has a 386sx-16 cpu and i was thinking that io may be able to make some type of computer out of it. any idears
|
|
|
Post by bender on Oct 13, 2007 19:39:39 GMT 10
www.astromech.netI saw one of the droids made by a member today and now i think im going to build one but a small one at first then try for the bigger droid. The R5-D5 is what im thinking. could be a lot of fun.
|
|
|
Post by bender on Aug 14, 2007 2:37:13 GMT 10
my old canon has movie mode but its not very good. if only my new 400D had movie.
so webcam is no good then? what about a video camera attached to a capture card?
|
|
|
Post by bender on Aug 13, 2007 15:42:05 GMT 10
i think il grab one of those cheap webcams and give this a try.
|
|
|
Post by bender on Aug 13, 2007 0:18:17 GMT 10
that looks like it could be a bit of fun. what about if you just mount a mirror on a motor and point a laser at it in place of the level?
|
|
|
Post by bender on Aug 12, 2007 16:07:53 GMT 10
oh what software is that?
|
|
|
Post by bender on Aug 11, 2007 17:07:44 GMT 10
so whats everybody been up to then? im back at tafe so dont have much time to start projects let alone finish the ones im doing
|
|
|
Post by bender on Mar 6, 2007 13:46:21 GMT 10
|
|
|
Post by bender on Mar 6, 2007 12:56:07 GMT 10
its for a simple pan/tilt type of thing im doing with a mate of mine. i looked at the picaxe bet it seems that servo control doesn't work if you are using serial if i cant find a cheap prebuilt one then il do something like this www.rentron.com/SerialServo.htm but atm would prefer to find one made already
|
|